Millworker Help Printable version
Help / Materials

Quick Takeoff

Assembly Drawing

The sheets, layups, hardware and edgebanding to buy, counted from the assembly, as a report.

Where

The BOM cut down to what you buy: no list of panels, just these groups, in six columns: Item, Code, Description, Qty, Unit and Size. Code is the INNERGY code when there is one (a sheet stock's or its material's, an edgeband's, and for hardware the iProperty set in Settings, References tab: Stock Number unless you change it), else the project's MatFin code (a layup's own code, hardware by its description or part number). The page is landscape and the Description column takes the rest of the width, in the same place in every group, so long descriptions show in full.

Sheet goodsThe sheets of each stock, from the same planning as the nest, with their size and area.
LayupsOnly when the parts have layups (Tag Layups): each layup's code and description, how many panels and their face area.
HardwareLibrary, Content Center and bought parts, counted (including the hardware Place Hardware put in). Handles, pulls and knobs (by part number, description or file name) are always hardware, each, never sheets. Its name is the Hardware Library's for the part, else its description; a description that's only a STEP import's header (STEP AP203) gives way to the part number.
EdgebandingEach edgeband's running length over every banded edge, plus 10% for trimming.

It has a design of its own, Quick takeoff (added to the designs the first time): save it as PDF or CSV, print it, or change it in Design… without changing the BOM's.