Millworker Help Printable version
Help / Hardware

Hardware Library

Part Assembly

A simple list of your hardware parts: a category, a model state and which way each goes into the hole.

Where

Your hardware parts (screws, Confirmats, dowels, hinges, inserts…), one row each. Hole types say which part goes in which hole; Insert Fastener and Place Hardware put them in.

Screenshot placeholder images/hardware-library.png 1300 × 760 px Hardware Library window: the list of parts (category icon, Name, Category, Model state, Direction) with the mouse over a row and its part preview showing; the Selected part card on the right (Direction, Seat offset, Turn, iPart row, Hole types it goes in).
The Hardware Library, with a part's preview on hover.
The Hardware Library, with a part's preview on hover.

Adding parts

The list

CategoryScrew, Confirmat, Dowel, Insert/Nut, Hinge, Cam/Connector, Shelf pin, Bolt, Handle, Magnet/Catch or Other. Its icon shows on the row and in the tools' lists.
NameWhat the tools list. Blank: the file's name.
Model stateThe model state placed (a cabinet hinge open or closed). (as saved) is the one the file was saved in. The states are read from the file.
DirectionWhich of the part's own axes points into the hole: +Z, −Z, +X, −X, +Y or −Y.

Hover a row to see the part. The picture is the file's Windows thumbnail: no part is opened, so nothing asks to resolve a link and nothing can crash.

Selected part

DirectionAs in the list. The part's origin goes where the hole starts, on the panel's face.
Seat offsetmm: moves the part along the hole; positive goes further in.
Turn°: turns the part about the hole's axis.
iPart rowAn iPart factory: the member to place (blank: the default row).
Hole types it goes inThe hole types whose fastener this part is. Hole types… opens them.

A part that already has an MW_Seat iMate is seated by it; there −Z turns it over. An iPart member from another library whose factory is not on this PC (for example one from W4INV) can't be placed by Inventor: Millworker saves a standalone copy beside it (name MW.ipt, the original untouched) and uses that.

Stand-ins

Place Hardware puts a plain purchased part shaped from the hole's sizes in a tagged hole with no part in the library, made once in the Millworker Hardware folder. Its Part Number is the hardware's name, so the BOM counts them and the cut list leaves them out.

OK saves the library in Millworker Hardware.json next to the material database. A library from before keeps working.