Design Copy
A new, renamed version of an assembly (or a drawing and its assembly) with everything it uses, in another folder: Copy or Reuse each file, rename them all at once from the ribbon, set iProperties.
- In an assembly or a drawing: Millworker tab → Tools panel → Design Copy. The window opens and reads that assembly or drawing in.
- With nothing open: Millworker tab → Create panel → Design Copy. The window opens empty: Open the assembly (.iam) or drawing (.idw, or an Inventor .dwg), or drop it on the window.
A new version of an assembly, the way Inventor's Copy Design and Pack and Go do it, with the renaming done in batches. Every file it uses is a row: subassemblies, parts, the base models of derived parts, the drawing and its models, linked files. The originals aren't changed: they're copied as they are on disk, and only the copies are opened, repointed and saved. A cover shows while files are read or copied. To rename the files themselves, or only save new iProperties, with no copy, switch Rename on (below).
The workflow
- Open the assembly or drawing (it's read for you when you start Design Copy in one). Add files… brings in files that go with it: another assembly, a part it doesn't use yet, a PDF or spreadsheet; each comes in at the top of the tree with everything it uses. Find related… looks in the design's own folders (not library or Content Center ones) for files the design doesn't use: other drawings, assemblies, parts, presentations, spreadsheets and PDFs. They come up in a tree, each with what it uses (a drawing with its assembly, the assembly with its parts; files already in the list are greyed). Tick the ones to add: ticking a drawing or an assembly ticks what is in it, and a part you untick under it comes in reused (its copies point at the original). Tick the drawings ticks every drawing at once. This check also runs by itself right after a design opens when there are such files; untick Look for these each time a design opens to stop that (Find related… still works). You can drop files on the window too.
- Copy to: From shows the file being copied; under it, To: type the folder the copies go to, or click the folder icon in the box. Every row going there follows when you change it; a folder typed on a row stays. A note under the box warns when the folder is in the Vault working folder (nothing is checked in) or outside the Inventor project. The tick boxes under them, side by side, with any warning beside them: Keep subfolders (a file from a subfolder of the source's folder goes in the same subfolder there), Open when done (Copy only: opens the new copy's top, the drawing when you copied a drawing, else the assembly).
- To project… (Copy to) copies the design into another project in one step. Pick the project (the folders under the projects root in Millworker Settings, as Create lists them; type to find one) and its work order, the project folder itself, or a New work order… (its folder is made when the copy is made). Copy to is set to that folder. Change 261097 to 261100 puts the new project number in every new file name and iProperty that carries the old one; a reused file that carries it is copied so it can take it (library and Content Center files stay reused). The MatFin workbook: link the copies to the project's own (Use existing), copy it into the project folder as
<job>_MatFin.xlsxwhen the project has none, or keep linking to the source project's. Undo takes it all back. - Copy, Reuse or Exclude each file: click the icon at the start of its row; each click goes Copy, Reuse, Exclude; when a Copy row's file is already in the destination (it shows red), the click from Copy goes to Use existing first. Use existing (teal link) copies nothing: the copies point at the file already in the destination folder (from an earlier copy, say), under its new name or, when that isn't there, its own name; a linked file such as the MatFin workbook takes the one file of its kind there (261100_MatFin.xlsx for 261097_MatFin.xlsx). That file is left as it is, iProperties too: the row (and the iProperties panel) shows that file's values, greyed, not the original's. You can change its name or folder to point at another file there. Reuse is different: the copies keep pointing at the original in the source folder. A file set to Copy whose name is already in the destination shows red; right-click and pick Use existing for every file already in the destination to set them all at once.Exclude (red circle) leaves the file out of the new design: it isn't copied, and it is taken out of the copied assemblies that use it (an excluded subassembly takes what is only in it out too). A file a copied derived part or drawing needs can't be excluded: it shows red. Copy (green) makes a new file; Reuse (blue) keeps pointing at the original. With several cells selected down the table, the click sets all their rows; right-click rows for Copy and Reuse too. Set on a subassembly or a model, its whole contents go the same way (library, Content Center and linked files stay reused unless you set them yourself).
- Rename in batches: click a column's heading to select the whole column (Ctrl+click for more columns, or drag over cells for some of them), then right-click it for the tools (below). Or type in a cell; Ctrl+V pastes a column of names from Excel down the rows.
- Fix anything red (the Notes column says why), then Copy design. It asks once, then makes the copies and, when Open when done is ticked, opens the new top: the drawing if you copied a drawing, else the assembly. Nothing else is opened.
Rest the mouse on a row to see the file's picture, its type and what its copy will be.
Tools for the selected cells (right-click)
Right-click a column heading or the selected cells for these. Every tool works on the cells selected: a whole column when you clicked its heading. Most open a small window with their settings and a preview of every value that changes; OK makes the change, Undo (Ctrl+Z) takes it back. Only files set to Copy change.
| Auto name | Each value made from a pattern: {Top} the top assembly's new name, {N:00} a running number, {Original} the old name, {Name} the new name now, {Number} and {Desc} the number and description in the old name (261234_Side Panel → 261234, Side Panel), {Kind}, and any iProperty, e.g. {Top}-{N:00} or {Number}_{Desc}. Insert puts them in. |
| Find and replace | Text found in the selected cells and replaced; an empty Replace takes it out. Match case when it matters. With nothing selected it looks in every name and iProperty cell. |
| Prefix / suffix | Text in front of, or after, each value. |
| Number | A running number down the column, before or after the value or instead of it. Type the first number as it should look, any length: 261085001 counts 261085001, 261085002…; 001 counts 001, 002…; 26195683854322001 works too. Step is how much it goes up by. |
| Copy to column | The selected cells' values copied into another column on the same rows: New file name into Part Number, Part Number into Description, File name (the old name) into New file name… |
| Split part number | The selected cells' values (select the File name column for the old file names) broken into their number and description, 261234_SidePanel into 261234 and Side Panel, each into the column you choose, as Part Numbers does. Its preview shows one row per component: the value now, the new part number and the new description. |
| Change case | CamelCase (the default: lower back panel → LowerBackPanel, each word's first letter capital and the spaces taken out), UPPER, lower, Title, or just the spaces tidied. |
| Back to original, Clear | (Edit) The selected cells back to the original file's values, or emptied (iProperty cells). |
Columns
- Right-click a column heading, or inside the selected column: Copy <column> to lists the table's other columns; pick one and the values are copied into it row by row. Fill from copies another column into this one, Reset the column puts it back to the original values, and the tools above work on it too. Below them are the files' own: Copy, Reuse, back to the original.
- Ctrl+C copies the selected cells (one line per file); select another column and Ctrl+V pastes them in, row by row. One line pastes into every selected cell; lines from Excel paste down the column.
- Material shows each part's material (the Millworker material from the Material Manager, else Inventor's). Double-click a part's cell, or select parts and right-click Set material…, to give the copies another: the picker lists the Material Manager's materials (type to find one; Material Manager… opens it to add or change one). A new material shows bold, like any edit (hover: what the part has now). The copy gets it as Materials & Finishes puts it on: the material, its look, its finish on the large faces and its codes. Back to the part's own material undoes it; Reuse rows and library parts keep theirs. Material (Columns) shows or hides the column.
- Highlight repeats in <column> (right-click the heading, ticked when on): any value another file in the table has too is shown red with white bold text, so two files don't end up with the same name or part number (Vault won't take that). New file name compares the whole name with its extension (Cabinet.iam and Cabinet.idw are different files); an iProperty compares the models with each other and the drawings with each other, as a drawing usually carries its model's part number. Reused files count with their own values; excluded files don't count. It stays on for that column next time.
- Columns… (View, or right-click a heading) lists every column side by side: Design Copy's own, then the iProperties in Summary, Document Summary, Project and Custom. Tick the ones to show; kept for next time. Action, File name, New file name and Notes are always shown (greyed). Type a name under Custom for one no file has yet. A version problem still shows in Notes when Version is hidden.
- Text size (View) makes the table's text bigger or smaller, 8 to 16 pt; the rows grow with it.
- Action, Type and File name stay at the left when the table scrolls right; you can still size them.
- Drag a heading to move the column (a blue line shows where it goes); a click on a heading still selects the column. Set the columns once: their order and widths are kept as you change them, and the table opens the same next time. Reset order puts them back.
- The iProperty columns start as Part Number, Description and Stock Number. Tick others in Columns…, or right-click a heading for Add iProperty column…; untick one (or right-click its heading) to take it out.
- Edited cells are bold, in blue on a pale blue tint (hover: what it was). A reused row shows the original's values, greyed.
- Part Number follows the new name when it was the file name, as in Copy Design, until you change it.
The table
- Esc stops only what you are doing: a cell being typed in goes back to what it was, a column drag or sizing stops, the hover picture goes, a folder being typed goes back, else the selection is cleared. It never closes the window: Cancel, the close box or Copy design do that. In a small pop-up (Find and replace, Number…) Esc cancels that pop-up.
- Tree (View) shows the files as the assembly is built: a subassembly's files indented under it; click ▸ to close or open it (Expand all, Collapse all). A file used in several places shows under each, and is one file: change it anywhere and it changes everywhere. Select one of its rows and its other rows are tinted too. Flat lists every file once.
- Base models once (View, on): each base model shows as one row under the top level (after its other files) instead of under every part made from it. Nothing about the links changes: the derived parts still point at it, and Copy, Reuse and renaming work on that one row.
- Right-click rows: Copy, Reuse, Use existing, Exclude, back to the original name and values, take an added file off the list, open the original's folder.
- A picture a file uses that isn't there (a library part's image) is left out of the list: there is nothing to copy or point at.
Copy, Rename or Update
Three choices in the Design group say what Design Copy does. It remembers the last one you used.
- Copy: new files go to the Copy to folder, and the originals aren't changed. The button reads Copy design.
- Rename: nothing is copied. The files themselves are renamed and saved where they are. The Destination column is hidden, the Copy to folder is greyed, and the button reads Rename design.
- Update: nothing is renamed or copied. Change the iProperty cells (by hand or with the ribbon's tools), then click Update iProperties. Only the files whose iProperties changed are opened and saved, with the names and folders they have. The New file name and Destination columns are hidden. The action icon reads Update or Keep.
Rename and Update work the same way below: the files are closed in Inventor first and nothing is opened after, and read-only (Vault) files and unsaved changes stop them.
- Fixing a wrong job number: say everything was named 1097 and should be 1095. Choose Rename and open the assembly (or its drawing), then use New name and type 1095…. Every file that has 1097 gets 1095: the drawings, subassemblies, parts, base models, their Part Numbers and other iProperties. Then click Rename design. Each file is saved under its new name in its own folder, and everything in the list that uses it is pointed at the new name. When all of that has worked, the old 1097 files go to the Recycle Bin.
- In Rename, the action icon reads Rename (rename it, or save it with the same name for its iProperties) or Keep (leave it as it is). Exclude isn't offered in Rename or Update, because nothing is taken out.
- When Rename is chosen, or a design is opened with Rename chosen, the drawing beside each model that has its name is added for you, so the drawings follow the new names. Add any other drawing that uses these files with Add files. A file that isn't in the list isn't changed, and it would lose a renamed file.
- The files are closed in Inventor first; nothing is opened when it's done (open the new names yourself). A window open on a file that isn't in the list but uses them stops the rename until you close it, and so do changes that aren't saved.
- Shown red, and so stopped: a read-only file (checked in to Vault), which you check out first or rename in Vault; and a renamed file used by a file set to Keep, which would lose it.
- If anything doesn't work, nothing goes to the Recycle Bin: both the old and the new files stay in their folders, and the message lists what failed.
New name
New name (Design) gives the whole design its new name in one go, from the top: the drawing when you opened a drawing, else the assembly. Type the new name, and the part that changed is picked out, widened to the whole piece between separators: 261085001_QuarryTrails… to 261089001_QuarryTrails… changes 261085001 to 261089001.
- The same change in every file that has it (on): every file's new file name and iProperties that carry 261085001 get 261089001: the drawing, subassemblies, parts, base models, spreadsheets and other linked files. A reused file that carries it is set to Copy so it is renamed too (library and Content Center files stay reused). The preview lists every change.
- Only the drawing and its assembly are new (or only the assembly): everything else is reused, so the new top points at the same parts.
The iProperties panel
On the right, every iProperty of the file selected (one row, or a cell on it), grouped as Inventor groups them; with nothing selected, or a whole column, the top assembly; a drawing's row shows the drawing's. Bold values are what the copy will get from the table (hover: what the original has). It only shows: nothing is written to the original. Right-click a property to add it to the table as a column. Drag its edge to make it wider; the width is kept.
Inventor versions
The Version column shows the Inventor each file was saved in (2026, 2027…). Inventor can't open a file saved in a newer Inventor, and a file it saves is moved up to its own version, which the older Inventor then can't open.
- Newer than this Inventor (red, or noted on a reused row): Inventor 2026 can't open a 2027 file. It can only be reused, and Opening or adding one says so plainly ("saved in Inventor 2027: open it in Inventor 2027 instead"). The status line counts them.
- Older, and its copy will be saved (amber): a 2026 file copied in Inventor 2027 that gets pointed at other copies or new iProperties is saved by 2027, so Inventor 2026 won't open the copy. Copy design says how many before it starts. A copy that is only copied (nothing changed in it) stays in its own version. To keep a design in 2026, run Design Copy in Inventor 2026.
Read-only files (Vault)
A file that is read-only on disk and isn't a library or Content Center file is checked in to Vault. Its row is greyed and its note says so, and the status line counts them. The copy can still be made (the copy is writable), but from the local file as it is, which may not be Vault's latest. To copy the latest: check it out (or Get the latest version) in Vault, then close Design Copy and open it again so it reads the files afresh.
Checked before the copy
- Red, stops the copy: no name or folder, characters a file name can't have, a name Windows keeps (CON, PRN…), a path over 259 characters, two copies with the same name in the same folder, a file of that name already in the folder, or the original's own path.
- Amber, asked about: a copy keeping the original's name (Inventor works best when every file's name is its own), a copy nothing copied uses (every file that uses it is reused), a file with changes not saved (the copy is made from the file as last saved: save first).
How the copy is made
Each Copy file is copied to its new name (a read-only flag from Vault is taken off the copy). Then, children first, each copy that uses a copied file, or gets new iProperties, is opened unseen: its references are pointed at the copies (assembly to its parts and subassemblies, derived part to its base model, drawing to its models, a linked file to its copy), it's brought up to date, the iProperties written, and that file alone saved. Reused files keep pointing at the originals. If it stops part way, it offers to delete the files it made. Nothing is checked in to Vault.